Pressure Cleaners

All about Pressure Cleaners and Their Features

2012-01-17T23:16:00.001-08:00

Pressure cleaners are without doubt great hard surface cleaners. These machines can be used to clean parks, pavements, parkways, floors, and walls. The operation of pressure washing machines is relatively simple. Such equipment pumps high pressure output on to hard surfaces, which washes away the dirt and impurities present on the surface.

The following is an overview of pressure cleaners.
Output Pressure
Output pressure is the most defining feature of a pressure washing machine. Output pressure of pressure washers ranges up to 8000 psi, depending upon the model. For normal hard surface cleaning tasks, a pressure level of around 3000 psi or less will be enough.

For certain kinds of cleaning jobs, the pressure level of the machines must be low. For instance, pressure washer machines used for auto detailing should not have a pressure level higher than 1500 psi.

Other Specifications
Other major specifications of pressure cleaners are flow rate and output temperature. Flow rate is the quantity of water passed through the output of the machine per minute. It is denoted as gallons per minute (GPM). Daimer offer machines such as the Super Max™ 6120SCW with a flow rate of .5 GPM

Pressure cleaners usually have one or two of three available output ranges - cold water (at room temperature), hot water (210°F), and steam (330°F). Some of the latest models from Daimer® equipped with tri-mode technology provide all three kinds of output temperature.

Tips to Buy
Always buy machines based on your requirement and needs. Trust only well-established suppliers. Daimer®, which has many years of experience in supplying cleaning machines, is a good choice. For more about the pressure cleaners from Daimer®, visit www.daimer.com.

Things to Check When Buying Pressure Cleaners

2011-12-07T21:54:00.001-08:00

Pressure cleaners are perhaps the most powerful cleaning machines available today. These machines offer an output pressure up to 8000 psi and an output temperature up to 330°F, depending up on the model. When choosing a pressure washer, it is important to check pressure levels, flow rate, and output temperature. It is also important to check the strength and durability of the parts of the machine too. This post provides some tips to buy the most durable, high-performance pressure cleaners from Daimer®.

Hose
The hoses are one of the most important parts of pressure cleaners. The high pressure output passes through the hose. Therefore, the hoses have to be strong enough to withstand the high pressure output of the machine. The best option is to buy machines that have hoses with twin layers of wire-reinforced rubber. These hoses can withstand even very high pressure flows.

When there is option between rubber-covered hoses and thermoplastic-covered hoses, rubber-covered hoses are always the right choice. In addition, non-marking hoses are a better bet as these hoses do not leave any marks or scratches on the floor.

Quality Parts
The best pressure cleaners in Daimer®’s Super Max™ series, like the Super Max™ 9000, will have stainless steel housing and other parts made of either stainless steel or equally high-quality material. The cabinet and other parts must be strong enough to withstand any accidental exposure to high pressure output.

Daimer®, a premier distributor of high-quality cleaning products, offers excellent pressure cleaners made of high-quality material. For further information about the various cleaning machines offered by Daimer®, visit www.daimer.com.

Tips To Buy Pressure Cleaners for Cleaning Public Works

2011-10-11T02:23:00.000-07:00

Pressure cleaners are the best machines for cleaning public places such as roads, parks, parking lots, walkways, stadiums. These machines have the required output power to blast away almost any kind of dirt and impurities from hard surfaces. Moreover, a number of models of pressure washers are portable as well. Still, one must keep in mind many things when buying pressure cleaners for cleaning public works. Here are a few tips.

Power Source
Pressure washers can be powered by various types of mechanisms. An electric motor and a combustion engine are two of the commonest such mechanisms. Electric pressures washers are smooth working and do not produce any noise or exhaust. However, these machines require an electric outlet placed at a suitable location to start working.

On the other hand, pressure cleaners powered by combustion engines can work anywhere as long as there is a sufficient supply of fuel, such as gasoline, propane or diesel. However, they do produce exhaust.

Flow Rate
Flow rate of pressure cleaners refers to the amount of output per minute. Normally the flow rate increases with the increase in output pressure. However, in certain situations, particularly in cleaning public places, one would need a machine with a low flow rate. An example of this might be if the place does not have sufficient drainage facilities, it would be wise to use a machine with a low flow rate.

It is important to use pressure cleaners of reputable distributors such as Daimer®. The company offers some of finest machines available at present. For more details about the various cleaning products of the company, visit www.daimer.com.

Tips to Use Pressure Cleaners for Auto Detailing

2011-09-10T02:59:00.000-07:00

Pressure cleaners have been relatively new to the field of fleet maintenance and auto detailing. Previously, these machines were considered much too powerful for this task. The reasoning behind this was the high pressure output generated by the machines might damage the vehicle surfaces. However, suppliers like Daimer® started launching new pressure washing machines specially made for auto detailing and fleet maintenance.

One can find a number of such suppliers on the internet. The problem with the internet is that not all of the suppliers found online are genuine. Here are a few tips for buying pressure cleaners from Daimer® specially made for auto detailing and fleet maintenance.

Output Pressure
Normally, pressure washers provide a high output pressure level, which could range up to 8000 psi, depending upon the model. For auto detailing, such powerful machines are not necessary. In fact, the pressure level should be relatively low. The specially made pressure cleaners for fleet maintenance should not have a pressure level of more than 1500 psi.

A machine with a higher pressure level could damage exteriors of automobiles, causing dents, scratches, and paint chipping. Even accidental exposure might damage such surfaces.

Flow Rate
Pressure cleaners for fleet maintenance should have a low flow rate. In fact, flow rates should be as low as possible, not exceeding 2 GPM. Units featuring low flow rates, such as Daimer®’s Super Max™ 6000, ensure that the surfaces of automobiles are not damaged during cleaning.

Another important thing to remember is to purchase the product only from reliable suppliers. Daimer®, a well-known distributor of cleaning equipment, provides pressure cleaners specifically for fleet and auto detailing maintenance. For more details, visit www.daimer.com.

Using Pressure Cleaners from Reputable Suppliers for Durability and Performance

2011-08-29T23:43:00.000-07:00

Pressure cleaners used in commercial and industrial applications must be capable of handling high pressure levels. They are commonly used for long hours and must have durable housing capable of handling the heat and pressure generated by the machine. Cheap quality cleaners are dangerous to use in these conditions.

Daimer® is an industry leader in retailing high quality cleaning machines for residential and commercial usage. They are known for their commitment to using only high-quality parts. Unlike cheap pressure cleaners that use aluminum housing, Daimer® pressure washers use top grade stainless steel or heavy duty schedule coils for heating. Coils of extremely high grade quality are imperative because heated cleaning machines require coils with high endurance capacity.

Daimer® pressure cleaning machines are available in powder coated steel housing which is durable, corrosion proof, and resistant to chipping. In addition, these pressure cleaners can endure high temperatures. The machines have quality accessories such as pressure hoses and trigger guns which help tackle even the toughest cleaning applications.

The best pressure washer equipment includes the Super Max™ 15400 which offers all three types of output; cold water, hot water, and steam.

This ensures these machines can be used for a wide range of cleaning jobs in the commercial and industrial sector. These pressure cleaners can be used to clean hard surfaces and heavy duty industrial machinery by blasting away debris at high pressure levels and temperature settings to get the best cleaning done on a variety of hard surfaces.

For more information about quality pressure cleaners, visit www.daimer.com.

How to Improve Efficiency of Pressure Washers

2011-08-21T23:39:00.000-07:00

Pressure cleaners are one of the most powerful cleaning machines presently available. These are used mainly for heavy duty industrial degreasing and cleaning hard surfaces. The main source of power of these machines is their high pressure output, which can range up to 8000 psi, depending upon the model. For normal hard surface cleaning, machines with an output power of 3000 psi are often used.

Even though pressure cleaners from Daimer® are powerful machines, some valuable additions for enhancing the output power will not do any harm. The following are some tips to increase the cleaning efficiency of these machines.

Use Tri-mode Machines
Normally, a pressure washer provides one or two of the following three types of output: cold water, hot water, and steam. Cold water is unheated water, hot water machines reach 210°F, and steam pressure washers reach 330°F.

Tri-mode pressure cleaners in Daimer®’s Super Max™ series can provide all three types of output. This feature provides flexibility to the machine in addition to enhancing the cleaning efficiency. The operators can switch to the desired mode of output temperature depending up on the nature of the surface.

Use New Technologies
Nowadays, pressure cleaners come attached with a number of new technological features. These new features certainly add value to the overall efficiency of the machine. One good example is the AST® technology offered by Daimer®. This technology allows the operator to handle the on and off operations of the machine using the trigger of the scatter gun.

Daimer®, a top distributor of cleaning machines, offers pressure cleaners equipped with this technology. For more information, visit www.daimer.com.

Buying Pressure Cleaners? Read This Before You Do

2011-08-10T23:51:00.000-07:00

Before purchasing pressure cleaners in the Super Max™ series from Daimer®, you must educate yourself about the main aspects, such as temperature options, flow rates, pressure levels, and power modes. Let us take a look at each of these aspects:

• Temperature Options: Depending on the temperature of water ejected, pressure washers are divided into steam based, cold water based, and hot water based versions. For light cleaning tasks, cold water versions, like the Super Max ™ 8900C-322, are ideal. For more cleaning power and versatility, choose tri-mode pressure cleaners, like the Super Max™ 6000, that eject steam at temperatures of up to 330ºF and hot water at temperatures of up to 210ºF.

• Flow Rates: Pressure cleaners in the Super Max™ series feature flow rates in the range 0.5 GPM to 8 GPM. For more cleaning power, opt for power washers with higher flow rates. While flow rates of 0.5 GPM will do for auto detailing applications or places where water must be conserved, you can opt for pressure washing machines with flow rates of about 5 GPM for tough jobs like concrete maintenance.

• Pressure Levels: For light maintenance jobs, choose pressure cleaners featuring pressure levels less than 1500 psi. Commercial maintenance operations demand power washing machines with pressure levels between 1500 psi and 3000 psi. For the toughest jobs, you can choose power washers with pressure levels more than 3000 psi.

• Power Mode: Based on your specific requirements and fuel availability, you can choose from the Super Max ™ range of pressure washers powered by electricity, propane, or gas.

For more tips on purchasing the right pressure cleaners, visit www.daimer.com.

Tips to Buy Pressure Cleaners for Fleet Maintenance

2011-07-17T23:51:00.000-07:00

Pressure cleaners are one of those cleaning machines that are an essential part of the vehicle cleaning process. The advantages of these machines are fairly easy to understand. No other cleaning machines can provide as much cleaning power and speed as pressure washers can. But the high pressure output of these machines can be counter productive if one makes a wrong choice.

The following are some tips to buy the right pressure cleaners for cleaning automobiles.

Limit Pressure Levels
Top quality power washers from Daimer® can provide an output pressure as high as 8000 psi. For vehicle cleaning, one does not require a machine with such high pressure levels. The output pressure level should not exceed 1500 psi. Machines with higher pressure levels could cause damage to the softer surfaces in an automobile. Pressure cleaners are mainly used to clean hard surfaces in vehicles, like engine parts and body.

Low Flow Rate
An important consideration in fleet maintenance is the amount of water being used. Machines with low flow rates reduce the amount of water passed on to the surface, reducing costs to trap waste water and the possibility of EPA fines.

For those in the mobile auto detailing industry, consider Daimer®’s Super Max™ 6120 SCW, specially made for auto detailing. It features pressure levels of 1000 psi, low flow rates of 0.5 GPM, and steam temperatures of 250°F.

Daimer®, a top-notch supplier of cleaning machines, offers specialized pressure cleaners for fleet maintenance. For more details about these machines, visit www.daimer.com.

Tips to Buy Pressure Washers for Fleet Maintenance

2011-07-14T23:09:00.000-07:00

Here’s What You Must Know Before Buying Pressure Cleaners

2011-06-19T23:22:00.000-07:00

There are several aspects that you must consider while purchasing pressure cleaners. Here is a look at some of those important aspects.

• Power Mode: Pressure washing machines in the Super Max™ series from Daimer® are most commonly powered by gas, propane, diesel, or electricity. Electric versions are currently popular due to their silent operation, compact size, and low maintenance costs/

• Temperature Options: Pressure cleaners are available in three basic variants based on temperature—cold water-based, hot water-based, and steam-based. Super Max™ 8900C-322 is a cold water-based version that is ideal for light applications. For challenging cleaning operations, tri-mode pressure washing units like Super Max™ 6000 are the best, which can generate hot water at temperature as high as 210ºF and steam temperature of up to 330ºF.

• Pressure Levels: Super Max™ pressure cleaners with pressure levels below 1500 psi are suitable for light maintenance jobs. Pressure levels ranging from 1500 psi to 3000 psi help simplify commercial cleaning operations. Extremely challenging jobs require the use of pressure levels of above 3000 psi.

• Flow Rate: Pressure cleaners in the Super Max™ range come with flow rates ranging from 0.5 GPM to 8 GPM. As the flow rate and pressure levels increase, so does the cleaning power. While auto-detailing applications benefit from low flow rates of 0.5 GPM, highly demanding concrete cleaning often require flow rates of 5 GPM.

Different combinations of the above aspects produce varying degree of cleaning power. Check out www.daimer.com to discover a comprehensive range of pressure cleaners with different cleaning capabilities.

Understanding Pressure Cleaners before Purchasing One

2011-05-23T23:08:00.000-07:00

By ejecting highly pressurized water, pressure cleaners successfully simplify the most challenging cleaning applications and offer unbelievable cleaning results as well. The staggering range of pressure washing machines available from various distributors will astound you. Daimer® - a leader in high-quality cleaning solutions – brings you the best in pressure cleaning systems with the Super Max™ range. Let us look into choosing the right version for your needs.

The Super Max™ series features heated, non-heated, and tri-mode versions of pressure cleaners. Cold water based power washers such as the Super Max™ 8900C-322 are ideal for managing general cleaning activities that do not need the aggressive cleaning power of steam or hot water. These electric power cleaning units do not need to heat water and thus do not feature any fuel tanks. As a result, they are compact, lightweight, and easily portable.

Heated versions of pressure cleaners in the Super Max™ series utilize the combined power of hot water or steam and high pressure levels to offer unmatched cleaning power. Heated models of power washing units with steam temperatures up to 330°F thus help eliminate tough stains and grime from different surfaces.

If you need a versatile pressure washing system that offers the functions of both heated and non-heated versions, tri-mode pressure cleaners such as the Super Max™ 6000 are a good choice. This power washer is capable of generating pressure levels of 750 psi, steam at temperatures up to 330ºF and hot water at temperatures of up to 210ºF.

Check out the amazing range of pressure cleaners available at www.daimer.com.

What Heated Pressure Cleaners Can Do for You

2011-05-16T23:30:00.000-07:00

There are a number of different pressure cleaners available, all of which are ideally suited for a range of different tasks. For example, steam pressure washing units are generally used in commercial and industrial areas for high-level cleaning tasks. The combination of steam and pressure makes these machines very effective in dealing with tasks like heavy grease removal. Similarly, cold water units are ideal for lighter cleaning tasks that do not require excessive heat or cleaning power. Hot water pressure cleaners also have their own set of advantages. These units are ideal for tackling cleaning jobs that require a certain level of heated cleaning power.

Daimer® offers a number of heated pressure cleaners to tackle a range of commercial and industrial cleaning jobs. Heated pressure washing units are effective in dealing with hardened or sticky substances, or deposits that have a light adhesive quality to them. The hot water helps soften the sediment, making it easier to remove. The pressurized water then works to lift and remove the sediment from the surface.

Hot water pressure washer can also be tri-mode cleaning machines. Pressure washers such as Daimer®’s Super Max™ 7000 can be used as cold water machines with room temperature water, hot water machines with temperatures reaching up to 210°F, and steam pressure washers up to 330°F. This allows the machine to be used for everything from light cleaning to heavy degreasing. Best of all, they effectively clean a number of surfaces without relying on harsh cleaning agents. In this way, these machines are very eco-friendly. Get more information on these pressure cleaners and other products by visiting www.daimer.com.

Pressure Cleaners—The Right Choice for Fleet Maintenance

2011-04-25T23:08:00.000-07:00

Car washing services and fleet maintenance professionals generally have a hard time cleaning vehicles. In addition to dust, vehicles accumulate caked mud, stubborn stains, tough grease, squashed bugs, and tree sap on a daily basis. Cleaning off all this mess involves investing large amounts of time and effort unless you are equipped with high-performance cleaning machines such as pressure cleaners. In fact, you now get to choose from pressure washing machines that have been specifically designed to manage auto detailing applications.

To maintain trucks and other heavy vehicles, it is best to check out the low flow pressure cleaners available from Daimer®. The Super Max™ 6120SCW is one vehicle detailing system that is widely used by car wash professionals. The pressure level of 1000 psi is perfect for removing dirt and stains without causing damage to vehicle exteriors.

Low flow pressure cleaners, such as the Super Max™ 6120SCW, come with low flow rates of 0.5 GPM. This low flow rate helps keep water usage to a minimum. Low flow rates also allow you to use this power washer to detail delicate components such as automobile engines. This pressure washing machine is capable of attaining steam temperatures of up to 300ºF. This superhot steam instantly softens tough stains, grime, and tree sap from vehicle exteriors, thereby greatly simplifying the detailing task.

Pressure cleaners, like the Super Max™ 6120SCW, can be used to maintain different surfaces of vehicles, such as the exteriors, glass, tires, and wheels. This perfect combination of unique capabilities makes this pressure washing machine one of the best on the market today.

To view more pressure cleaners that will aid fleet maintenance activities, visit www.daimer.com.

Quality Aspects of Pressure Cleaners

2011-04-03T22:07:00.000-07:00

Cleaning professionals highly recommend using pressure cleaners to tackle the tough cleaning operations in commercial and industrial settings. These versatile cleaning machines help cut down the time and effort required for challenging cleaning jobs. However, to enjoy impeccable cleaning performance for years, you must ensure that you purchase top-grade power washers from leading suppliers such as Daimer®.

The Super Max ™ series of pressure cleaners from Daimer® are notable for their guaranteed quality, reliability, and durability. Unlike cheap power cleaners featuring aluminum, sheet metal, or plastic casing, Super Max ™ power cleaning machines come with powder coated stainless steel housing. Additionally, this housing helps resist chemical corrosion and chipping. This heavy-duty construction promises protection from wear and tear even under challenging conditions.

The demand for heated versions of pressure cleaners is now on the rise. The reason is obvious—hot water or steam-based power washers offer superior cleaning results over cold water versions. However, if the power cleaning machine must continue to generate hot water or steam at consistently high temperatures, it must feature heavy-duty, stainless-steel heating coils, just like the Super Max ™ power washing machines. Because these pressure cleaners adhere to high standards of user safety, there is no reason to panic even when the machine is generating steam at extremely high temperatures.

Another innovative feature of the Super Max™ power cleaning equipment is the self-clean function of the boilers. By preventing the accumulation of scale deposits, this self-clean feature helps keeps boilers clean and functioning in top condition. Best of all, these boilers feature lifetime warranties. Visit www.daimer.com to discover more reasons to purchase these pressure cleaners.

Using Low-Flow Pressure Cleaners for Fleet Maintenance

2011-03-20T22:31:00.000-07:00

Cleaning and maintaining large vehicles like buses and trucks is harder than most of us would expect. This is mainly because trucks tend to collect more dirt, grease, and grime than smaller vehicles. Consequently, the cleaning gets tougher. To efficiently manage the task of fleet maintenance, it is important to be equipped with advanced cleaning equipment such as pressure cleaners.

Conventional pressure washing machines and steam cleaners are not exactly great for vehicle-detailing applications. With flow rates of 5 GPM and high pressure levels of up to 3000 psi, ordinary pressure cleaners could actually do more damage than good. Steam cleaners can dissolve stubborn stains, but can damage the vehicles exterior by using high heat levels and brushes. For this reason, leading suppliers like Daimer® now bring you pressure washing machines specifically made for vehicle-detailing jobs.

One of the best pressure cleaners from Daimer® is the Super Max™ 6120SCW. Unlike powerful pressure washing machines that feature extremely high pressure levels and flow rates, Super Max™ 6120SCW is a steam pressure washer that comes with low flow rates of 0.5 GPM and pressure levels of 1000 psi.

To quickly soften caked dirt and greasy deposits, steam pressure cleaners like Super Max™ 6120SCW eject steam at temperatures of up to 300°F. The average pressure level helps blast off softened dirt deposits without damaging vehicle surfaces. The low flow rates minimize water wastage and prevent damage to sensitive components.

Low-flow steam pressure cleaners are also good for detailing various parts of heavy vehicles such as windshields, wheels, metal body, and engine. Visit www.daimer.com for more information on using these auto detailing products for fleet maintenance.

Benefits of Using Pressure Cleaners for Concrete Maintenance

2011-02-27T22:54:00.000-08:00

No matter where, you can usually find concrete or asphalt roads, parking lots, driveways, and sidewalks. With miles of these structures, cleaning these areas is no easy task. Add to it the magnitude of dirt, grime, grease, and dust that roads accumulate and you will find that road maintenance is indeed tough business. This is exactly why public works departments now use advanced cleaning equipment such as pressure cleaners.

Thanks to a number of technologies, pressure cleaners combine the perfect features required for proper road maintenance. However, to ensure that you always purchase the best power cleaning machines, make your buy from reputable suppliers like Daimer®.

Solidly constructed from high-quality parts and components, the stationary, electric Super Max™ 12500 GE from Daimer® has been designed to offer the best performance even under the toughest working conditions. Tri-mode capability is another notable aspect of the Super Max™ 12500 GE, which allows this pressure cleaner to be used as a cold water, hot water, and steam pressure washer.

With the capability to eject steam at temperatures up to 330ºF, the Super Max™ 12500 GE eliminates tough deposits of grime, grease, or graffiti on different concrete surfaces. Features like flow rates of 5 GPM and pressure levels of 3000 psi also help enhance the cleaning process. Such pressure cleaners can be either trailer mounted or wheel mounted for easy mobility over large areas. In addition, it runs of gasoline so no electricity is needed.

Visit www.daimer.com to learn more about quality pressure cleaners.

Truck Mounted Pressure Cleaners – Perfect for Industrial Cleaning

2011-02-10T22:35:00.000-08:00

Truck mounted or trailer mounted pressure cleaners are portable versions of power washers specifically designed for use in vast industrial areas. There are many benefits for choosing these portable power washers. In addition to being mobile and ruggedly built, these pressure washers also feature innovative cleaning technologies guaranteed to manage the most challenging cleaning tasks. The Super Max™ 8900C-840 WS from Daimer® is an excellent example of one such powerful, solidly built, feature-rich power cleaner.

A cold water based power cleaner, the Super Max™ 8900C-840 WS, is driven by a 10 HP gasoline engine. Flow rates of 3.5 GPM and pressure levels of 4000 psi make these pressure cleaners suitable for managing a wide range of cleaning tasks in industrial and commercial settings. For additional versatility, this power washer is available with multi-gun operation.

Pressure cleaners that are trailer mountable are commonly used for cleaning across areas far away from each other. In addition, many machines in Daimer®’s Super Max™ series also feature wheels for moving around a small area. For cleaning confined to one area, stationary machines can be used along with Daimer®’s Long Hose Technology, capable of allowing the operator to reach up to 300 feet away.

These pressure cleaners are also notable for their advanced cleaning technologies. Daimer®’s Automatic Shut-Off Technology™ is just one of these innovative features. By automatically shutting down the pump when the power cleaner remains idle for over 30 seconds, the auto shut-off feature helps prevent overheating of delicate components. This in turn keeps maintenance costs to a minimum and guarantees excellent performance for years.

Check out www.daimer.com/pressure-washers/ for more details on these powerful, truck mounted pressure cleaners.

Pressure Cleaners with an Industrial Edge

2011-01-23T21:56:00.001-08:00

Pressure cleaners are used for a number of commercial cleaning jobs. From cleaning parking lots to commercial kitchens, power washers are very effective in many commercial settings. They are also ideal for industrial settings as well. It is important to note that the pressure cleaners used for industrial cleaning jobs are often very different from other pressure washing systems. This is because industrial areas must deal with more difficult cleaning applications than commercial settings, such as degreasing machinery and equipment. These areas also need to be kept as clean as possible. A failure to do so can cause machinery to malfunction or danger to the workers.

Daimer® understands that not only do these pressure cleaners need to be tough and durable, but they also need to be versatile and convenient. This is why many of the systems in their Super Max™ series are tri-mode machines. This means that they can operate as cold water, hot water, or steam pressure washers. This is convenient because many industrial areas have a range of cleaning tasks. Some may be relatively light and suited to cold water pressure washers. Other tasks, like degreasing, are best suited for steam pressure cleaners. Tri-mode units allow the operator to tackle all these tasks with a single machine.

Industrial pressure cleaners, such as Daimer®’s Super Max™ 12300 feature pressure levels of 3000 psi, temperature levels up to 330°F, and flow rates of 5 GPM. These industrial pressure cleaners are also versatile in terms of mobility. Stationary units are available, as well as machines that can be trailer-mounted and wheeled. Among the portable systems, varying fuel options are available. Operators can choose from gas, diesel, and propane-powered units. Mobile units can also be powered by electricity, which is convenient for indoor cleaning jobs. To get more information on pressure washers from Daimer®, just check out www.daimer.com.

Tips to Use Pressure Cleaners for Cleaning Public Works

2010-12-13T03:57:00.000-08:00

Pressure cleaners are widely used in public works departments. These machines are used to clean roads, parks, pavement, stadiums, parking lots, and more. Powerful pressure cleaners can eliminate tough dirt and stains quickly and easily from a number of hard surfaces in different areas.

Pressure cleaning machines pump high pressure output onto hard surfaces to blast away dirt and impurities. The output pressure of these machines can reach up to 8000 psi, depending on the model. For most cleaning tasks, pressure levels of around 3000 psi are adequate.

The following are some practical tips to look into when purchasing pressure cleaners.

Power Source

The major power sources of pressure washing machines include an electric motor or diesel, propane, or gasoline combustion engine. For outdoor cleaning applications, many professionals prefer fuel powered machines, as electrical outlets are not always available in outdoor places. Electric pressure cleaners are often used indoors, as they do not emit toxic fumes or require proper ventilation as fuel powered machines do.

Low-flow Technology

Pressure washing machines use large quantities of water. In some cases, water run-off might cause problem, particularly if the drainage facilities are poor. It is better to use machines equipped with low-flow technology to avoid problems related with water run-off.

Daimer®, a top supplier of cleaning machines, offers pressure cleaners with the low-flow technology. For further details about a host of cleaning machines offered by Daimer®, visit www.daimer.com.

Why Pressure Cleaners Are Preferred For Fleet Maintenance

2010-11-08T22:17:00.000-08:00

Pressure cleaners are widely used for fleet maintenance. In addition to vehicles, these machines can be used for cleaning marine vessels as well as airplanes. Their high pressure levels can eliminate tough dirt, stains, and grease from a number of different areas.

Companies with fleets of vehicles, ships, or planes that have their own cleaning departments should choose good-quality pressure washers for optimal cleanliness. If hiring a cleaning company to do the job for you, always make sure they use top of the line products. Regular cleaning with top-quality brands will help clean quicker and more effectively.

Why Pressure Cleaners?

Pressure cleaners are extremely powerful cleaning machines. These machines pump their output onto the vessel surfaces to blast away any dirt or impurities present on the surfaces. Some of the latest models can provide an output power as high as 8000 psi. However, such high-powered pressure is not often required for fleet maintenance. In some instances, higher pressure levels can even damage the vehicle. As such, pressure levels should max out at 1500 psi or less when cleaning automobiles. Acceptable pressure levels are higher for ship and plane cleaning.

Pressure cleaners, such as the Super Max™ 7000 from Daimer®, are available with tri-mode temperature options, as well. Cold water output is at room temperature, hot water output can reach up to 210°F, and steam output has a temperature of 330°F. Such temperature options heighten versatility by enabling users to tackle a host of different pressure washing applications.

Daimer ®, a top supplier of cleaning products, offers excellent pressure cleaners. For more details, visit www.daimer.com.

Pressure Cleaners – Quality Cleaning Machines for a Wide Range of Applications

2010-10-11T04:06:00.000-07:00

Powerful pressure cleaners are best equipped to handle cleaning operations where hard surfaces and industrial equipment are involved. They blow away debris and dirt at high pressure levels and can be set at suitable temperatures depending on the type of cleaning operation involved.

Pressure cleaners that use hot water for cleaning operations offer the added cleaning power afforded by heated water. Hot water pressure cleaning is useful in areas where the stains are hard and deeply settled. It also cleans oil and grease stains much more efficiently than other cleaning equipment. However, for maximum cleaning power, consider a pressure washer boasting of high steam temperatures to almost instantly dissolve stubborn grease and stains. Such high quality pressure cleaners are often used for cleaning building exteriors, concrete structures such as parking lots and sidewalks, and industrial cleaning equipment.

Pressure cleaners from Daimer®, a leading supplier of quality cleaning machines, are well equipped to handle the toughest cleaning jobs with a high degree of efficiency. The Super Max™ 12500GE for instance, can reach pressure levels of 3000 psi. In addition, the 12500 GE features flow rates of 5 GPM and steam temperatures of 330°F, alongside tri-temperature technology. They are made of highly durable materials such as stainless steel and schedule 80 heating coils. The machine casings are rugged and powder coated with dual layered power hoses delivering superior performance every time.

Daimer® also provides high performance electric pressure washers to match specific cleaning applications. They offer many advantages, as the power and heat are carried out by use of electricity. The absence of exhaust and smoke makes it easier for use in indoor settings. Both hot and cold water cleaning operations are possible from a single machine, effectively simplifying cleaning operations. They are perfect machines for commercial and industrial applications because of their versatility.

Visit www.daimer.com for more details on pressure cleaners and information on the latest electric pressure washers.

Go Mobile in Cleaning with Gas Powered Pressure Cleaners

2010-09-20T03:49:00.000-07:00

Many job applications, such as marine cleaning and agricultural cleaning, require the use of pressure washers. However, it is very common to see these areas without a readily available power supply for electric machines. For these circumstances, consider gas powered pressure cleaners.

Gas powered pressure cleaners have many benefits. For one thing, these machines do not require an electric outlet. This gives the operator the flexibility to move the machine around to other areas. Gas powered machines are also free of electrical cords, eliminating the possibility of workers tripping over cords or having them become stuck between bushes, furniture, and other obstacles.

These gas powered pressure cleaners offer high levels of pressure for large cleaning jobs making them beneficial for cleaning areas like building exteriors, parking lots, and sidewalks. Machines such as Daimer®’s Super Max™ 12500 GE is a gas powered, propane heated pressure washer offering pressure levels of 3000 psi and flow rates of 5 GPM. Steam temperatures up to 330°F give the 12500 GE a powerful cleaning force to effectively eliminate tough dirt and grime.

Although these machines are the most ideal for outdoor use, they can be used for indoor applications as well. For indoor use, it is important to make sure the area is properly ventilated. Gas pressure cleaners produce exhaust and proper ventilation will ensure clean air for the workers or cleaning staff.

Daimer® supplies the most powerful and portable gas powered pressure cleaners. Their pressure washers feature robust and heavy-duty gasoline engines giving them amazingly high pressure levels and flow rates for powerful cleaning of toughest stains and grease.

Improving the Efficiency of Pressure Cleaners

2010-08-24T04:38:00.000-07:00

Pressure cleaners are among the most powerful cleaning machines available today. Top models of these machines can provide a high output pressure, often up to 8000 psi. Some of the latest models can provide a high output temperature as well.

Still, there are ways to improve the efficiency of pressure cleaners. The following are some tips to enhance the performance of these machines.

Use Green Chemicals

Despite the extreme power of these machines, the efficiency and speed of the cleaning process can be enhanced through the addition of cleaning solutions. Green cleaners are recommended because they are safe for the environment, non-toxic, will not harm the surface or user, and are just as powerful as the harmful detergents on the market. Daimer® offers a wide variety of green cleaning chemicals in their Eco-Green® series for different cleaning tasks, including graffiti removal, marine cleaning, and degreasing.

Green cleaning chemicals are used the same way as other cleaners. They are applied to the surface prior to the start of the cleaning process or mixed directly into the pressurized output that ejected from the machine. The molecules in Eco-Green® chemicals break down and weaken the bond between the surface and dirt. In addition, they help prevent dirt from reattaching to the surface. Using green chemicals along with a pressure washer can significantly boost its cleaning power. They improve the cleaning efficiency of these machines without harming the environment.

Artificial cleaning chemicals leave toxic residue on the surface. This residue can be harmful to those who encounter it and can contaminate products such as food and liquids. Green chemicals, however, can do a better job without leaving any harmful residues behind.

Use Tri-mode Machines

Tri-mode pressure cleaners provide three kinds of output: cold water, hot water, and steam. Such flexibility widens the range of use for pressure washers. Cold water output can be used to clean areas that do not need the added advantage of hot water or steam. Meanwhile, steam can be used to help eliminate the toughest dirt and stains, like grease.

Daimer®, a major supplier of cleaning products, offers efficient pressure cleaners. For more information, visit www.daimer.com.

Features of High Quality Pressure Cleaners

2010-08-04T02:46:00.000-07:00

Pressure cleaners, or pressure washers, are among the most powerful cleaning machines being used today. Because of their power, the materials they are constructed from must be durable and reliable. If they are not capable of withstanding rough use, the machine will break down and require fixing.

To elaborate the point, an industrial pressure washer can provide output with a pressure level of 8000 psi and a temperature of 330°F. This output is ejected through hoses and can potentially affect the trigger guns and casing of the pressure cleaners. Therefore, the casing and accessories of a pressure washing machine must be sturdy and built strongly enough to withstand high temperature and pressure output.

It must be noted that not all pressure washers are built with durable material. Many companies try to reduce cost by choosing less durable material to manufacture these machines. However, reputable companies such as Daimer®, offer pressure washers that are durable and capable of withstanding constant use.

Here are some tips to select the strongest and sturdiest pressure cleaners.

Casing

The housing of good quality pressure washers are made of high quality powder coated steel or stainless steel. Such material help prevent corrosion and damage on the surface, even if the body is exposed to high pressure levels and temperatures for long periods.

Hoses

More than the housing and other parts of the body of pressure cleaners, hoses endure the most wear of the high power output of the machine. Hoses must be made of wire-reinforced rubber. Ideally, the hoses should have two layers of wire reinforcing.

Daimer®, a top supplier of cleaning machines, provides 1800 psi pressure washer with rubber hoses and two layers of reinforced wiring. For more information, visit www.daimer.com.

When to Choose Mobile or Stationary Pressure Cleaners

2010-07-14T05:22:00.000-07:00

When selecting pressure cleaners, it is important to look through all the features of different machines, and choose one most suited for your needs. One of the more common features operators look for is mobility.

Before selecting a mobile or stationary pressure washer, you need to assess your needs. Those that require the machines to move around from place to place to clean large areas will need mobile pressure washers. Places confined to a small area can be cleaned with stationary pressure washers.

Businesses such as mobile car washes, where transporting pressure cleaners is part of the business, invest in machines that can be truck or trailer mounted. The Super Max™ 7000 runs on electricity, can be installed on a trailer, and has pressure levels of 1000 psi, suitable for thoroughly cleaning vehicles without damaging them. The compact size of the machine ensures that it takes up minimum space.

Electric pressure cleaners are not always the best option, particularly when you are operating in areas with no regular power supply. The Super Max™ 12500 PE offers the same mobility as the 12800, but is heated and run by propane. This machine has pressure levels of 3000 psi and flow rates of 5 GPM, making it ideal for cleaning roads and construction sites. However, such high pressure levels should not be used in auto detailing.

For buyers who want powerful, productive machines but do not require mobility, stationary pressure cleaners such as the Super Max™ 15700 are a good option. The 15700 offers three temperature options as well as optional multi-user functionality. It can be used by two users simultaneously, drastically reducing the time required cleaning tasks. Additionally, with Daimer®'s unique Long Hose Technology, operators can work up to 300 feet away from the machine without experiencing any reduction in power. Visit www.daimer.com to learn more about Daimer® pressure cleaners.

Pressure Cleaners: How to Choose a Quality Product

2010-06-21T00:15:00.000-07:00

Pressure cleaners handle extreme temperatures and high pressure levels, whether in commercial applications or industrial capacity. Both industrial and commercial pressure cleaners need to be robust machines that can run for long hours. You need machines that can complete tasks quickly and maintain high productivity. A low-quality pressure washer does not offer these advantages. Machines built for home use will break down under the stress of commercial operation. Therefore, it is important to select a quality pressure cleaning machine with durable components and wear-resistant parts.

It is important to select pressure cleaners with high-quality parts. For example, the heating coils are crucial parts of heated pressure cleaners. These coils are generally made of aluminum in low-cost machines. However, aluminum is not very durable, particularly when put under constant high pressure levels and temperatures for a long duration. Daimer®, on the other hand, sells pressure cleaners with stainless steel or heavy duty schedule 80 heating coils.

The powder-coated steel housing is durable, corrosion and chip resistant, and can endure high temperatures. In addition, Daimer® features high quality pressure hoses and trigger guns designed to withstand the demands of high pressure and temperature levels.

Finally, product warranties are an important indicator of quality. Suppliers who offer proper warranties establish confidence in their merchandise. Warranties also help a buyer deal with breakdowns and damage that can make business operations go haywire when quick parts replacement and machine servicing are unavailable. They also help you avoid the cost of replacement and servicing. Daimer® offers a one-year warranty on their pressure cleaners. Visit www.daimer.com to learn more about their pressure cleaners.

Selecting the Best Pressure Cleaners

2010-06-08T02:12:00.001-07:00

Pressure cleaners, also known as pressure washers, are used to clean hard surfaces and heavy duty industrial equipment. Power washers offer effective cleaning by blasting away debris at high pressure levels and temperature settings. A prospective buyer should check several factors before selecting a suitable pressure washer.

There is no universally accepted best pressure washer. Cleaning requirements often determine the type of pressure washer one requires. For example, heavy duty industrial degreasing requires a pressure washer with a pressure level of 3000 psi or more paired with high temperature levels, whereas auto detailing requires a machine with a pressure level of 1500 psi or less.

Still, most quality pressure cleaners possess some common features. The following are some such features.

Multiple Temperature Options
The latest models of pressure cleaners provide three different temperature levels: cold water, hot water, and steam. A good example is the tri-mode machines from Daimer®, a pioneer of many new technologies in this field. Such models, including the Super Max™ 15400, offer all three kinds of output. In other words, these models can help clean a wide variety of jobs.

Useful Technologies
Modern machines of pressure cleaners boast many innovative technologies. Daimer®’s AST® technology is one such feature. This technology automatically switches off the machine if there is no output flow for 30 seconds. The operator can switch on the machine by simply pulling the trigger of the scatter gun. This is both convenient for the cleaning worker and helpful in reducing the wear and tear of the machine.

For more information about these and other cleaning products from Daimer®, visit www.daimer.com.

Hot Water Pressure Cleaners for Difficult Cleaning Tasks

2010-05-18T03:02:00.001-07:00

Pressure cleaners that utilize heated water offer extra cleaning power for a variety of cleaning jobs. Pressure washing units use the power of pressurized water to blast away dirt and debris from different surfaces. However, pressure output alone may not be enough to clean certain deposits. In some instances, the deposits may be very old or hard. In others, they may consist of oil or grease, which does not easily wash away with cold water. In these cases, hot water pressure cleaners can be an effective cleaning solution.

Daimer® recognizes the need for hot water pressure cleaners. In fact, for greater user convenience, there are a number of models available that operate as cold water, hot water, and steam pressure washing units. The hot water in these pressure washing machines goes a long way in softening and loosening hardened sedimentation. They can even be effective in tackling certain kinds of grease, grime, and oil stains. The Vapor-Flo® 8800 is a good example of one of the many models of hot water pressure cleaners offered by Daimer®. This machine has pressure levels of 1800 psi and a flow rate of 2 liters per minute. This particular unit is portable and ideal for cleaning in areas where water efficiency is important.

Many hot water pressure cleaners offered by Daimer® are mobile units. This means they are great for outdoor cleaning jobs. Cleaning areas like parking lots or garage spaces can be done quickly and easily with these units. Best of all, you do not have to use any corrosive or toxic chemicals. To learn more about these pressure washing machines, simply log on to www.daimer.com.

How to Choose Pressure Cleaners for Indoor Washing

2010-04-20T04:21:00.000-07:00

Pressure cleaners function by pumping high pressure output onto hard surfaces to blast away the dirt and impurities present. These machines can be classified in many ways, including power source.

Electric Pressure Cleaners
Electric powered machines use electricity as the source of power. An electric motor is the main component of electric pressure washers. Other types of machines, such as gas pressure washers and propane pressure washers, are also available.

For indoor cleaning applications, electric pressure cleaners are often the best choice. The main advantages of these machines include continuous run time, lack of exhaust, and low noise production.

Electric pressure washers require an external electric source, such as a power outlet, which are usually abundant in indoor settings.

Lack of Exhaust
Gas, propane, or diesel pressure washers generate exhaust that results from the combustion of fuels. This can be a problem if used in indoor settings, as it increases the humidity level in the room. Electric machines do not leave any exhaust, as there is no combustion process involved in their functioning. It is important to recognize, however, that gas powered systems can be used indoors by placing the machine outside and utilizing extended hoses.

Where to Find the Best Machines
The best electric pressure cleaners are available from Daimer®, a reputable supplier of cleaning products. You can find more information about the company and its products at www.daimer.com.

Can Pressure Cleaners Clean Concrete?

2010-03-08T01:17:00.000-08:00

Pressure cleaners are useful for cleaning a number of materials and tackling difficult cleaning jobs. However, many people wonder how well they clean concrete. Pressure washing machines are ideal for cleaning various concrete structures and have proven to be useful in many public works cleaning jobs. Not only are these machines durable, but they are also very effective in removing stains and debris from concrete surfaces. This goes a long way in extending the life of the concrete and preventing things like cracking and chipping.

Daimer® has a number of pressure cleaners suited to clean concrete. This can be a difficult task for conventional cleaning methods because concrete is porous, allowing debris and liquids to soak into the concrete. In these cases, steam pressure cleaners are ideal for loosening and removing deep-seated stains. Concrete is also susceptible to large amounts of debris build-up, especially on sidewalks, driveways, and roads. Using chemical cleaners on these areas is not always effective since they may eat away at the concrete.

Pressure cleaners are an effective alternative since they use pressurized water to blast dirt off surfaces. As such, there is no risk of chemical erosion. Coupled with adequate water flow rates, these pressure washing machines can clean roads and sidewalks quickly and effectively. Daimer® pressure washers can also be paired with Eco-Green® green chemicals to safely increase the cleaning power of the machine for demanding applications without harming the surface, the environment, or the user.

It is important to ensure you use a machine with the right pressure levels. Very high pressure levels can cause damage to delicate surfaces, but are often necessary for demanding applications like graffiti removal. You can click on www.daimer.com to learn more about what pressure cleaners can do for you.

Truck-Mounted Pressure Cleaners — What Makes Them Different?

2010-02-14T20:33:00.001-08:00

Unlike stationary pressure cleaners, trailer-mountable or truck-mounted pressure washers are mobile versions of pressure cleaning machines powerful enough for heavy duty cleaning in industrial environments. The Super Max™ 12200 from Daimer® is one excellent example of a feature-rich, truck-mounted power cleaner. This ruggedly-built pressure washing machine has been expertly configured to help simplify the task of cleaning vast industrial areas.

In addition to being trailer-mountable, the versatile Super Max™ 12200 is also capable of independently functioning as a steam power cleaner, hot water pressure washer, or cold water power washer. With steam temperatures of 330°F, pressure levels of 2000 psi and flow rates of 4 GPM, these pressure cleaners are built to handle far more challenging applications than other systems on the market. Advanced pressure cleaners such as the Super Max™ 12200 AST also include innovative features like the Automatic Shut-Off Technology™. This incredible technology ensures that the pump and motor will automatically shut-off if the machine is not in use for over 30 seconds. This feature prevents overheating components and results in longer life for the machine. For this reason, these pressure cleaners are recommended for contracted jobs such as cleaning large industrial areas, as users work far from the machine and switching off the machine for each break is inconvenient.

Learn more about the advantages, limitations and applications of truck-mounted pressure washers at www.daimer.com.

Try Pressure Cleaning when Faced with Heavy-Duty, Industrial Cleaning Tasks

2010-01-26T21:42:00.001-08:00

Pressure cleaners are popular machines for industrial cleaning tasks. These machines are easy to use and offer exceptional results for a wide variety of jobs. These power washers are efficient and reliable when it comes to removing almost all types of stains, grime, and dirt deposits from various surfaces in industrial environments.

For example, the Super Max™ 12200 from Daimer® is among the best power cleaners available on the market. The versatility of this power washer is adequately illustrated by its capability operate as a cold water, hot water, or steam power cleaner. This pressure washer can also be heated using a variety of different methods.

Pressure cleaners like the Super Max™ 12200 are ruggedly constructed with top-grade parts and components. These trailer-mountable versions are also well suited for cleaning vast industrial areas or outdoor areas. Due to their high pressure levels of 2000 psi, high flow rate of 4 GPM and steam temperatures of 330°F, these pressure cleaners provide outstanding cleaning power.

Another notable feature offered by Daimer® is Automatic Shut-off Technology™. This technology ensures that the pump of the pressure washer will automatically turn off if it remains idle for more than 30 seconds. In addition to preventing overheating of the components, this technology also protects the important parts of pressure cleaners from wear and tear resulting from overheating. For an AST® equipped machine, consider the Super Max™ 12200 AST.

For more information, take a look at the exciting range of pressure cleaners and carpet cleaning machines available at www.daimer.com.

Pressures Cleaners to Keep Up With Commercial Cleaning Needs

2010-01-08T01:07:00.000-08:00

Many pressure cleaners on the market today are designed for a variety of commercial cleaning tasks. These tasks range from cleaning hotel and restaurant kitchens to removing chewing gum from public parking areas and sidewalks. Unfortunately, a pressure washing machine used in one situation may not work as effectively in another. This is why you must conduct research to find the right pressure washing machine best suited for your needs. Another option is to consult a product specialist, like those at Daimer®; they will help match the right machine to your specific applications.

Daimer® has a variety of pressure cleaners available to choose from, each suited to different cleaning needs. There are machines that run on gas, propane, electricity, or diesel. This makes it convenient to handle both indoor and outdoor applications.

Some outdoor areas are better suited for gas, diesel, or propane powered machines, as these systems do not require use in proximity to a source of electricity. For many indoor cleaning jobs, electric machines may be more suitable, as they generate no exhaust. These pressure cleaners also come with varying pressure levels and flow rates to effectively deal with different cleaning requirement.

Commercial pressure cleaners come in three main operating modes. Cold water pressure washers can effectively remove most types of deposits from different surfaces. However, these systems cannot remove heavy grease without the use of additional green chemicals, like Eco-Green® Ultra-Power™ Degreaser. Hot water pressure washers use heated water to remove stubborn stains and hardened deposits. Very tough cleaning tasks can be completed with wet steam pressure washing machines. To meet the requirements of virtually all applications, many of Daimer's pressure cleaners are tri-mode systems, capable of being operated independently in cold water, hot water, and steam modes.

Visit www.daimer.com to learn about which pressure washer is best for your needs.

Pressure Cleaners - Cleaning Outdoor Surfaces

2009-12-23T01:42:00.000-08:00

Pressure cleaners use water at high pressure levels to remove dirt, grease, grime, and other unwanted deposits from many surfaces, including parking lots, sidewalks, walls, stairs, machinery, and other indoor and outdoor surfaces. Pressure cleaners have found their niche in industries where heavy-duty cleaning is required and simply spraying water through a garden hose onto the surface does not offer sufficient power.

For the most demanding outdoor applications, Daimer®'s pressure cleaners offer incredible power. The Super Max™ 12500 GE, for example, can reach pressure levels of 3000 psi and a flow rate of 5 GPM. The gas-powered motor enables utilization of optimum power outdoors where an electrical outlet is not readily available. As an added bonus, this is a tri-mode machine. It can be used independently as a cold water, steam, or hot water machine depending on the complexity of the application at hand.

Many of Daimer®'s pressure cleaners, including the 12500 GE, have a two-gun option for multi-user operation. They can heat steam up to a maximum temperature of 330°F and hot water up to 210°F.

A trigger wand allows you to control the water jet without having to move back and forth between the cleaning site and the switch. Find out more about Daimer® pressure cleaners and carpet cleaners on www.daimer.com.

How to Boost the Performance of Pressure Cleaners

2009-12-04T02:15:00.001-08:00

Pressure cleaners, or pressure washers, are the most powerful cleaning machines around. Some of the latest models can provide an output pressure levels ranging from 700 to 8000 psi. This range of pressure washing equipment can be used for a variety of tough applications, including: auto detailing, concrete cleaning, graffiti removal, equipment degreasing, truck washing, and more.

Higher pressure levels, temperature levels, and flow rates offer greater cleaning power. However, cleaning capabilities can also be enhanced by the addition of green chemicals. This is particularly useful in applications where high pressure levels may damage surfaces, as in auto detailing. The use of specialized green chemicals also enables operators to more specifically target certain stains, like graffiti.

Daimer®, an industry leader in providing cleaning machines, offers a host of pressure cleaners suitable for almost any task. To accompany these machines, Daimer® has recently introduced its line of revolutionary Eco-Green® green chemicals for use by themselves or in combination with the provider's vast array of cleaning machines. These green chemicals are unlike many products on the market. They are plant-based, readily biodegradable, and non-toxic, making them completely safe for all users and all environments.

Specific cleaning tasks require specific green chemicals. This is why Daimer® offers over 100 different formulas to target special applications. For example, Eco-Green® Graffiti Remover contains emulsifiers and lifters to virtually lift paint molecules from building exteriors, concrete surfaces, and other materials. Eco-Green® Heavy Duty Car Wash can be applied with hand or used with Daimer's pressure cleaners to render grease, dirt, tree sap, salt, and other molecules easy to remove and virtually incapable of re-attaching to clean vehicle surfaces. These are just a few of the many Eco-Green® green chemicals that are designed for use in combination with Super Max™ pressure cleaners.

For more information about pressure washers and green chemicals, visit Daimer® at www.daimer.com

The Perks of Using Gas-Powered Pressure Cleaners

2009-11-20T04:40:00.000-08:00

Pressure cleaners offer forceful cleaning power that you cannot obtain with most conventional cleaning tools or products. In order to make these cleaning machines accessible for different cleaning tasks, Daimer® has a number of gas powered pressure washing machines. Instead of being restricted by electrical wire and the need to be near an electrical socket, these gas powered pressure cleaners offer a unique combination of portability and high-powered cleaning abilities. The user can conveniently navigate their cleaning job without worrying about handling lengths of wire.

The main benefit of these gas powered cleaning units is that they bring optimum cleaning power to areas that may be unreachable by stationary machines. This makes these pressure cleaners the perfect option for cleaning large areas and doing outdoor work. For example, the Super Max™ 12500 GE has a pressure rate of around 3000 psi and a flow rate of approximately 5 GPM. This makes it a great cleaning machine to tackle even very rugged outdoor cleaning jobs.

These pressure cleaners also come with three different operational modes. Cold water temperatures are ideal for handling lighter commercial tasks. For projects that involve degreasing, the hot water or steam pressure washing mode will be more effective. With the added advantage of mobility, these machines can be used to clean large agricultural implements and even boats and airplanes. Portable pressure washers with different pressure and flow rates are available for different cleaning jobs. More information can be found on these pressure cleaners and other machines at www.daimer.com.

Pressure Cleaners Help Keep Airplanes Clean for Take Off

2009-11-04T22:05:00.000-08:00

Pressure cleaners are being increasingly employed by leading airlines to effectively clean their airplanes. Even if you own an airplane for recreation, investing in pressure cleaners is something you might want to consider to keep your airplane looking like new. They are powered by gasoline, electricity, or propane and heated by kerosene, diesel, heating oil, propane, electricity, or natural gas.

With airplanes, you need good cleaning equipment for inside as well as outside cleaning. Components, such as brakes and engine parts, can have a heavy build up of grease, debris, and other liquids. Pressure cleaners can effectively clean these components to keep the airplane running smoothly. Daimer® is the supplier of an extensive range of high quality pressure cleaners to serve the vital purpose of airplane maintenance by dissolving stubborn grease and other residues from key airplane and blasting away dirt, debris, and other deposits from the exterior of the plane.

For airliners and private plane owners, the exterior of the plane is not the only part that you want to clean and maintain. The XTreme Power® XPH-5900IU range of carpet cleaners, supplied by Daimer®, is the ideal solution for upholstery cleaning in airplanes. They can clean and dry upholstery and carpets in two hours; the increased productivity resulting from using low-flow machines is important if you run an airline.

Whether you want to keep the airplane exterior looking new or the engine running top notch, visit and explore www.daimer.com.

ncrease the Cleaning Power of Your Pressure Cleaners

2009-10-22T02:27:00.000-07:00

Pressure cleaners are powerful cleaning machines. Whether you use them in cold water, hot water or steam cleaning mode, they can tackle a wide range of stains, dirt and deposits. But, there are certain cleaning projects that call for a little extra cleaning power. In these cases, it’s best to couple the cleaning power of pressure cleaners with green chemicals from Daimer®. There are a host of special eco-friendly cleaning products available to tackle even very difficult stains.

For example, the Eco-Green® Concrete Cleaner with Rust Stain Remover is ideal for cleaning concrete surfaces. Pressure cleaners can certainly eliminate a large amount of dirt. Using this particular green chemical along with the pressure washing machine is ideal for removing stubborn rust stains, grease and oil spills and mildew from driveways and parking lots. Graffiti is another cleaning problem that is notoriously hard to deal with. Using some Eco-Green® Graffiti Remover along with the pressure cleaner can work towards removing old or very stubborn ink stains and paint marks.

Using the Eco-Green® Truck Wash along with your pressure cleaners can make an easy job of heavy vehicle cleaning and maintenance. Deposits like road salt, tree sap, grease stains, mud, and ordinary debris can be easily eliminated with this environmentally friendly cleaning agent.

All of these products are not only effective in tackling dirt; they are also readily biodegradable and plant-based. Unlike toxic cleaning products, non-toxic green chemicals will not harm you, your machinery, or the environment. You can learn more about maximizing the cleaning power of your pressure cleaners and about other green chemicals by visiting www.daimer.com.

Pressure Cleaners with Extra Convenience

2009-09-26T00:36:00.000-07:00

Pressure cleaners can be very helpful in tackling cleaning jobs both large and small. From something as simple as washing the car to heavy industrial degreasing projects, there is a pressure cleaning machine that is best suited for the job. Daimer® realizes that effective cleaning power only forms one part of a great cleaning machine. In order to be able to complete an effective cleaning job, the unit has to be convenient as well. This is why a number of pressure cleaners have the added advantage of multi-gun operation.

It is true that a number of pressure cleaners only have a single-gun function, and this is fine for certain circumstances. However, in many commercial and industrial situations, single-gun machines can be very time-consuming to operate for large applications. This is why certain pressure washing machines from Daimer® have multi-gun feature. For instance, the Super Max™ 20000, a very powerful cold water pressure cleaner, has a three-gun operation standard. This means that a tough cleaning job can be done at a much quicker speed with three users working at the same time.

A number of pressure washers come with the multi-gun operation as an optional feature. For instance, with the Super Max™ 12200, the customer can opt for the multi-gun feature at an additional rate. By opting for multi-gun pressure cleaners, jobs can be done much faster. This can be an incredibly efficient option for professionals who need to complete their cleaning tasks on a deadline. There is more information available at www.daimer.com on this and other cleaning products.

Green Cleaning Solutions

2009-07-30T05:49:00.000-07:00

Daimer® offers pressure cleaners that do not pollute, do not affect the user's health, and don’t break any pollution laws. They are easy to use and offer effective cleaning. These “green” formulas have zero harmful chemical content and derive most of their cleaning power from plant extracts. They use the unique Micro-Blasting® technology to remove dirt by breaking the chemical bonds within residues. Not only do they clean thoroughly, they also delay the reappearance of dirt on the surface. Pressure cleaners can be used for manual cleaning or for automated cleaning.

Eco-Green®Tile Grout Cleaner cleans tile and grout lines without leaving behind hazardous residues. They are ideal for use in kitchens where strict hygiene conditions must be maintained while ensuring that chemicals don’t find their way into food. Like all other Daimer® pressure cleaners, the Eco-Green® Tile & Grout Cleaner can be used with steam cleaners or other cleaning machines. It can also be used as an alternative to detergents if you prefer to clean with a mop or brush.

For cleaning floors, walls, and shelves, use the Eco-Green® Concrete Cleaner. This powerful plant-based solution can remove dirt, fungi, grease, and rust from surfaces. The Eco-Green® Graffiti Remover can remove most graffiti from hard surfaces. This product can remove paint and marker as well as grease. The Eco-Green® Truck Wash is one of the pressure cleaners from Daimer's inventory that is very useful in the auto detailing industry. All of these Eco-Green® products and more can help to increase the cleaning effectiveness of your pressure washers. Find out more about pressure cleaners on www.daimer.com.

Pressure Cleaners - Their Many Uses

2009-06-24T01:52:00.000-07:00

Daimer® pressure cleaners can do a lot more than removing dirt from surfaces. The Super Max™ 15900 AF, for example, works as a phosphatizing device as well as cleaning equipment. The 15900 AF has a stainless steel nozzle that directs chemicals onto metal surfaces. These chemicals prevent corrosion of the metal and prepare surfaces for paint primer or powder coating. The stainless steel parts of the phosphatizing device are highly resistant to the corrosive effects of the chemicals it comes into contact with.

Daimer® also offers pressure cleaners for wet sandblasting. The Super Max™ 8700 WS has maximum flow rates and pressure levels of 3 GPM and 1500 psi respectively. Wet sandblasting is a technique that uses wet sand or grit, "blasted" on a surface at high pressure to remove rust, flecks of paint, and similar substances adhering to the surface. Daimer pressure cleaners are available with a range of pressure levels and flow rates. You can choose between electricity, propane, or gas powered models. Most of the pressure cleaners offered by Daimer® are portable. They can be mounted on a trailer for outdoor cleaning and wet sandblasting.

The Super Max™ 9000 WS is a mobile device that has tri mode temperature settings. It can work as a cold water pressure washer, hot water pressure washer, and steam pressure washer. It can maintain pressure levels as high as 1500 psi and flow rate as high as 2.8 GPM. It has an built-in wet sandblasting feature, as well. Remember that for using wet sandblasting in tri mode pressure cleaners, the temperature must be set to ‘cold’. Find out more about Daimer® pressure washers at www.daimer.com .

Super Max ® 15200 AF

2009-05-29T21:25:00.000-07:00

The process of pre-treating metal surfaces is an important one especially in industrial settings. Pre-treating removes any rust on the metal and prepares surfaces before applying paint, primer or powder coating. Thus metals that have been subjected to pre-treatment come out virtually flawless. To ensure perfect pre-treatment of metal surfaces, it is imperative that you use quality pressure cleaners like the Super Max ® 15200 AF from Daimer®.

The Super Max ® 15200 AF is an electric, stationary, tri-mode pressure washer that is perfect for a wide range of industrial and commercial applications. These pressure cleaners can attain temperatures of up to 330º F, pressure levels of up to 1000 psi and flow rates of up to 2 GPM. These pressure cleaners that can be heated by oil, natural gas or propane, are also capable of individually functioning as hot water, cold water, and steam pressure cleaners.

One notable feature of these pressure cleaners is that they utilize a unique phosphatizing system using downstream injection. This system ensures the highest quality of metal pre-treatment. In addition, all components of these cleaning machines that come in contact with the chemicals used in phosphatizing are made of top-grade stainless steel to ensure durability and longevity. That makes the Super Max ® 15200 AF the perfect choice for powerful industrial applications that do not require high flow rates.

Next time you are looking out for the perfect equipment to pre-treat metal surfaces, simply turn to the fantastic range of pressure cleaners at www.daimer.com.

Pressure Cleaners – For The Best Cleaning Results Ever!

2009-04-29T21:19:00.000-07:00

Using the amazing power of highly pressurized water, pressure cleaners greatly aid in cleaning a range of surfaces from vehicles and driveways to floors and metal surfaces. These powerful cleaning machines are the perfect cleaning partner for several household and industrial applications.

Currently, there are three main types of pressure cleaners available – gasoline-based models, propane-powered models, and electric models. The affordable and portable electric power washers are great for cleaning small areas like windows or grills. But for more powerful cleaning action, you need to go in for gasoline-powered pressure cleaners that offer the easiest, fastest, and most effortless cleaning solutions for large areas like driveways and floors. In fact, gasoline-powered units often feature higher pressure levels and more robust motors than their electric powered counterparts.

If you are looking out for quality pressure cleaners with sandblasting capabilities, the Super Max® 8900C-640 WS from Daimer® would be a great choice. This is a cold-water based, wet sandblaster power washer that can attain a high pressure of up to 3000 psi even while maintaining a low flow rate of up to 4 GPM.

The power of its 10 HP gasoline engine enables this portable cleaning machine to offer unbelievably powerful sandblasting functions that can remove corrosion, rust, paint layers, and other heavy deposits from metal surfaces. It achieves these fantastic results by blasting metal surfaces with a mixture of pressurized water and sand grit.

So, to ensure the performance and durability of pressure cleaners, you need to consider purchasing top quality models like those offered by www.daimer.com.

Use Pressure Cleaners for Squeaky Clean Surfaces

2009-04-22T02:25:00.000-07:00

Pressure cleaners offer powerful solutions to clean different kinds of surfaces. These machines work by increasing the pressure of water and then focusing it into a narrow pressurized stream with amazing cleaning capabilities. Among the numerous pressure cleaning machines available in the market, the most durable, effective and powerful ones are definitely the ones from Daimer®.

Daimer® Super Max ® pressure cleaners are renowned for their durability, quality and reliability. For instance, consider the Super Max ® 8900C-322 cold water pressure washer. This cold water pressure washer powered by gasoline features a 6.5 HP gasoline engine, high flow rate of up to 3.5 GPM and a pressure of up to 2000 psi. The trailer-mountable, portable Super Max ® 8900C-322 pressure cleaners with optional wet sandblasting system are the perfect solution for pressure washing applications that would benefit from wet sandblasting capabilities.

Compared to electric or hot water models, these gasoline pressure cleaners possess several advantages. Since these cold water pressure washers do not require heating mechanisms, they are considerably smaller, more portable and more affordable. These cleaners are also capable of eliminating stubborn substances and stains from a wide range of commercial and residential surfaces. Best of all, they are ideal for situations that require portable pressure washers without the need of a continuous supply of electricity.

For more information on a wide range of innovative, powerful and quality pressure washers by Daimer®, visit the official site www.daimer.com.

Important Points About Pressure Cleaners

2009-04-09T21:07:00.000-07:00

While pressure cleaners are certainly a durable and effective cleaning tool, the machines themselves are often subjected to a lot of wear and tear. Little wonder, since they operate using high temperatures and high pressures. The Super Max® 7000 AST comes with a specialized technology that not only cleans dirt effectively, it also protects the machine while it cleans.

The Super Max® 7000 AST is one of the many pressure cleaners manufactured by Daimer®. It is ideal for commercial and industrial use and has the functionality of a steam pressure, hot water and cold water washer. These cleaners are ideal for cleaning commercial kitchens and rest rooms. They are also effective for tasks like gum removal. These pressure cleaners have a flow rate of 2.5 GPM and a pressure rate of 1000 psi, which means they offer a powerful and effective cleaning solution for even the toughest dirt build up.

These pressure cleaners also have a special technology known as AST ® or Automatic Shutoff Technology ®. If the gun is not in use for more than 30 seconds, the machine will automatically shut off the pump and motor. Once the trigger is reactivated, the motor and pump turn on again. This is convenient for people who are working with long hoses - there is no need to go all the way back to the machine in order to turn it on again. This technology greatly reduces the wear and tear on the machine’s main components. You can learn more about these pressure cleaners by checking out www.daimer.com.

Super Max ® 8720

2009-03-14T05:05:00.000-07:00

Cold pressure cleaners are often much more affordable than their heated counterparts. As such, many commercial and industrial users are often swayed to choosing cold pressure cleaners, especially in the face of the current economic downturn. For these users, Daimer ® offers an entire line of cold water pressure cleaners to meet their needs. One such machine is the Super Max ® 8720.

The Super Max ® 8720 pressure cleaners are highly portable units, making them beneficial for applications requiring mobility. When the wheels are removed, these pressure cleaners can also be used as trailer mounted or wall mounted configurations. And, as an added benefit to users with specific needs, the Super Max ® 8720 can be equipped with Daimer®’s exclusive wet sandblaster system or two-gun operation for multiple users on one unit.

With a flow rate of 4 GPM and pressure levels of 2000 psi, the Super Max ® 8720 pressure cleaners offer greater cleaning power than the 8700 model. It is important to note that cold pressure cleaners do not afford users with the additional cleaning power provided by heated models, like hot water or steam pressure washers.

Therefore, for users requiring immense cleaning power, heated pressure cleaners may be the ultimate solution. But, for users requiring ultra-portability and high pressure without the additional cleaning strength of heated pressure cleaners, the 8720 is the ideal machine. To view a wide variety of cold water, hot water, and steam pressure cleaners for any application, visit www.daimer.com.

Super Max ® 8700

2009-03-05T01:33:00.000-08:00

One of the most used features available with pressure cleaners is simply portability. Daimer®’s Super Max ® 8700 series of cold water pressure cleaners are ultra-portable units powered by advanced 230V electric engines. The first in the series of compact cold water pressure cleaners is the Super Max ® 8700.

The Super Max ® 8700 is a mobile, cold water pressure cleaner featuring a moderate pressure level of 1500 psi and flow rate of 3 GPM. Even though this is one of Daimer®’s cold water pressure cleaners, the 8700 supports inlet hot water temperature. And, for additional cleaning power, the 8700 uses low pressure injection chemical infusion for the addition of cleaning chemicals.

As with all of Daimer®’s pressure cleaners, the Super Max ® 8700 features durability and longevity, as it is built using only the highest quality components. For example, these pressure cleaners are housed entirely in powder-coated, high-gloss, chemical resistant, chip resistant steel.

The Super Max ® 8700 pressure cleaners are ideal for industrial and commercial applications requiring a moderately steam pressure washer with high portability, but without the additional cleaning power afforded by hot water and/or steam pressure cleaners. To discover pressure cleaners with greater power than the Super Max ® 8700 or to learn more, visit www.daimer.com.

Pressure Cleaners

2009-02-24T06:07:00.000-08:00

The Super Max ® 12820 AF is one of Daimer®’s powerful pressure cleaners for the pre-treatment of metal surfaces. These phosphatizing pressure cleaners can be used to pre-treat metal surfaces for the prevention of rust and corrosion or to prepare metal surfaces for the application of primer, paint, or powder-coating. It is necessary to pre-treat metal surfaces for these tasks to achieve a defect-free finish. And, the Super Max ® 12820 AF pressure cleaners are the ideal machines to do so.

The 12820 AF pressure cleaners are actually triple-function machines that can be used independently as cold water, steam, or hot water pressure washers with a pressure of 1500 psi and flow rate of 3 GPM.

What makes the 12820 AF pressure cleaners unique is the included phosphatizing kit. This kit uses downstream injection for metal pre-treatment. Using this method, the chemicals used in phosphatizing only come in contact with the high-pressure hose, injector, trigger gun, wand, and nozzle. All of these components are comprised of only the highest quality stainless steel, making them easy to protect against corrosive attack. Additionally, the 12820 AF pressure cleaners come with Daimer®’s unique dual lance wand which can control the flow of water between the high pressure nozzle and the low pressure nozzle.

Daimer®’s phosphatizing kit included with the Super Max ® 12820 AF pressure cleaners provide commercial and industrial users with the versatility of having both a metal surface pre-treatment machine and a triple-function pressure washer in one machine. To read more about Daimer®’s metal surface pre-treatment pressure cleaners, visit www.daimer.com.